Allcare Digital Tens Unit


Using internal memory, this TENS Machine can store patient data and display the information when needed on the LCD display.

$129.00 Excl. GST

Digital TENS Device

Using internal memory, this TENS Machine can store patient data and display the information when needed on the LCD display.

  • Dual Channel
  • Hard Carry Case
  • Battery Powered
  • Adjustable pulse width, pulse rate plus intensity
  • Digital LCD Display​
  • Timer of 15, 30 and 60 minutes
  • Will stop output at pre-set time
  • Compatible with commonly available electrodes
SKU: ALLDIGITENS Category:
Channel:Dual, isolated between channels
Pulse Amplitude:Adjustable 0-80mA, Max output 80mA
peak to peak (15.8mA rms) into 500ohm
load each channel, 1mA each step.
Output Voltage:Adjustable 0-40V, Max output 40V peak
to peak (8.5V rms) into 500ohm load
each channel.
Wave Form:Asymmetrical rectangular biphasic pulse
Power Supply:One 9 Volt Battery, type 6F22
Size:10.1cm (L) x 6.8cm (W) x 2.15cm (H)
Weight:155 grams with battery
Pulse Rate:Adjustable, 2~150 Hz , 1Hz/Step
Pulse Width:Adjustable, 50~300μs , 10us/Step
Mode:Four modes available, B(Burst), N (Normal) ,
M(Pulse Rate Modulation) and P(Program).
Parameters are adjustable at B, N or M
mode.
Nine pre-set programs (fixed) are available
of options at P mode. (Pulse Width Modulation
and Mixed
Burst:Burst rate adjustable, 0.5~5 Hz
Pulse width adjustable, 50~300μs
Frequency fixed = 100Hz
Normal:Constant output based on the setting value.
P.R. Modulation(-40%)Pulse rate is automatically varied in a cyclic
pattern over an interval of nominally 10 seconds.
(in max 150Hz) Pulse rate decreases
linearly over a period of 5 seconds from the
control setting
value to a value which is 40% less. Then
increase linearly over a 5 seconds period
to its original value. The cycle is then
repeated.
Timer:Selectable, 30 Minutes, 60 Minutes or
Continue.
Brochures
Allcare Digital Tens Unit Brochure